Gem Cutter Guide & Tips
About the game
Gem Cutter is a browser game where you cut the rough stone you receive into a gem. You can play for free on a phone or computer without signing up.
There are eight types of rough stone: Diamond, Ruby, Sapphire, Emerald, Aquamarine, Amethyst, Garnet, and Topaz. You get a different one each time, with its own color, shape, and weight.
The steps follow the order used in real gem cutting. Pick a cut, round the girdle, then grind the bottom, the top, and the flat top on the wheel before polishing. Set the finished gem in a piece like a ring or necklace to get a Grading Report and an appraisal.
How to play
- A rough stone appears and slowly spins. Drag it with your finger to turn it and see it from different sides.
- Seven cut cards appear below. Each shows the shape from above, the weight you can get from the rough, and the estimated appraisal for a perfect cut. The highest value is shown in gold. Pick a card and press “Cut this shape.”
- Round the girdle first. Rub left and right across the stone to grind its facets against the spinning wheel. The orange stripes in the diagram below show what still needs to be ground away. When the stripes disappear, press “Done.”
- Set the bottom angle. As you change it, the diagram shows where the light goes. Yellow lines show light bouncing back up, and red lines show light leaking out of the bottom. Find where the light meter is fullest, then press “Cut at this angle.”
- Cut the bottom, the top, and the flat top as in step 3. Before cutting the top, move the stick holding the stone to the opposite side.
- Rub the stone with your finger to clear the haze. Once it’s polished, drag to turn it and admire the finish. Press “Make jewelry” to continue.
- Choose Ring, Necklace, Brooch, or Tiara, then pick Platinum, 18K Gold, Rose Gold, or Silver. Press “Finish it” to have the piece appraised.
Cut shapes
You can choose from seven cuts commonly used in real jewelry.
- Round: A circular cut. It fetches the highest price for diamonds.
- Oval: An egg-shaped cut.
- Cushion: A square with rounded corners.
- Pear: A teardrop shape.
- Marquise: A boat shape with pointed ends.
- Princess: A square cut.
- Emerald cut: A rectangle with clipped corners and stepped facets. It’s the classic choice for emeralds.
Different cuts preserve different amounts of the same rough stone. For an elongated stone, an Oval or Emerald cut can give you a heavier gem.
Appraisal and titles
The appraisal adds the gem’s value to the cost of making the jewelry.
The gem’s value depends on its type, color, weight, cut shape, and cut grade.
- Type: Diamond is the most valuable, followed by Ruby, Emerald, and Sapphire. Amethyst and Garnet are on the cheaper side.
- Color: A richer, clearer color is worth more within the same gem type. For diamonds, the closer to colorless, the better.
- Weight: Heavier gems are also worth more per carat.
- Cut shape: Round is worth the most for diamonds. Other shapes are worth 20–30% less. Emerald cut is worth the most for emeralds. For other colored gems, Oval and Cushion are the standard, while Round is worth a little more.
- Cut grade: It depends on how precisely you stop grinding each facet and on the bottom angle. The five grades are Excellent, Very Good, Good, Fair, and Poor.
The cost of making the jewelry depends on the metal’s weight and price, plus labor. Brooches and tiaras cost more to make because they have many accent stones.
Your title depends on the appraisal.
- ¥10,000,000 or more: National Treasure
- ¥1,000,000 or more: Star of the Showcase
- ¥100,000 or more: Department Store Jewel
- ¥10,000 or more: Mall Accessory
- Under ¥10,000: Gift Shop Stone
- Ground down to powder: Gem Dust
Tips
- Look closely at the values on the cards. The cut that preserves the most weight doesn’t always have the highest appraisal.
- Use shorter strokes as the stripes get thinner. Once a facet is ground too far, you can’t put the material back.
- If the bottom angle is too shallow, light leaks out the bottom. If it’s too deep, the center looks dark. Look for the highest point on the meter.
- A Tiara uses so many accent stones that the making cost alone exceeds ¥1,000,000.
Frequently asked questions
- Q. What happens if I grind too much?
- A. The facet is marked “Too deep,” the cut grade drops, and the stone loses weight. If you grind it below 0.05 ct, it turns into Gem Dust.
- Q. Can I choose my rough stone?
- A. No. Press “Play Again” to get the next rough stone.
- Q. Does the game save my results?
- A. It doesn’t save your results. If you make a gem you like, press “Share” to post it with an image of the Grading Report.
- Q. Can I play on a computer?
- A. Yes. Drag the stone left and right with your mouse to grind it.
Guides for other games
- How to play Shove It All in the Closet and Pretend You Cleaned
- How to play Horisuro
- How to play Maou no Tou
- How to play Potato Stamp
- How to play Karesansui
- How to play Abyss Gaze
- One Sheep: How to Use
- Hexa Drop: How to Play
- How to play Chez Weeds
- How to play Glassblow
- How to play Hiragana Tower
- How to play Soft Serve Challenge
- How to play Rokuro
- How to play Kitsune Den
- How to play Dig It!
Problems or bugs? Please use the contact page.
Updated:



